Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Triumph Tiger 1200?

Model: Triumph Tiger 1200 Xc
Part: Battery

Video tutorial

It will be possible to replace the battery of the Triumph Tiger 1200 by loosening the screws that secure the seat of the motorcycle to its housing: once this has been removed, it will be possible to proceed by locating the battery underneath. This can now be freed from its location by disconnecting the power cables and unscrewing the screws that secure it to the respective supports: now it will be necessary to place the new replacement part in its location, connecting the cables and securing it with the screws.

It can then be covered with the seat, making sure everything is functioning properly.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

How to Replace the Indicator Bulb on the Triumph Tiger 1200
How to Replace the Indicator Bulb on the Triumph Tiger 1200
Tiger 1200 Xc To replace the front indicator bulb on the Triumph Tiger 1200, disconnect the connectors linked to the corresponding headlamp from inside the front f…
How to remove the rear wheel of the Triumph Tiger 1200
How to remove the rear wheel of the Triumph Tiger 1200
Tiger 1200 Xc This guide will show you the steps to remove the rear wheel of the Triumph Tiger 1200, following the instructions below. First, place your motorcycle…
How to replace the front brake pads on the Triumph Tiger 1200?
How to replace the front brake pads on the Triumph Tiger 1200?
Tiger 1200 Xc To replace the front brake pads on the Triumph Tiger 1200, loosen the screws that secure the brake caliper to its housing: once the screws are loosen…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos