Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Indicator Bulb on the Triumph Tiger 1200

Model: Triumph Tiger 1200 Xc
Part: Light bulb

Video tutorial

To replace the front indicator bulb on the Triumph Tiger 1200, disconnect the connectors linked to the corresponding headlamp from inside the front fairing. Once these are disconnected, loosen the screws securing the headlamp to its housing, removing it from its position and pulling out the bulb inside.

This bulb must be replaced with a new spare part; after replacement, reconnect the headlamp to the connectors, securing it with the screws removed earlier.


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on the Triumph Tiger 1200
How to Replace the Front Headlamp Bulb on the Triumph Tiger 1200
Tiger 1200 Xc In this video, see how to remove and replace the front headlamp bulb on a Triumph Tiger 1200 in simple, quick steps. First, position the central stan…
How to Reset the Service on the Triumph Tiger 1200
How to Reset the Service on the Triumph Tiger 1200
Tiger 1200 Xc In this tutorial, you will see how to reset the service on the Triumph Tiger 1200, a very simple and quick operation to perform only after completing…
How to remove the rear wheel of the Triumph Tiger 1200
How to remove the rear wheel of the Triumph Tiger 1200
Tiger 1200 Xc This guide will show you the steps to remove the rear wheel of the Triumph Tiger 1200, following the instructions below. First, place your motorcycle…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos