Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the motor oil in the Triumph Tiger 1050 Sport?

Model: Triumph Tiger 1050 Sport
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Triumph Tiger 1050 Sport, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we position a container underneath the motorcycle, locate the drain hole bolt and unscrew it using a 13mm socket wrench.

We then let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, all that's left to do is pour in the necessary amount of oil through the designated upper hole.


Posted on 21 October 2025 by ScegliAuto


Related tutorials

How do you replace the motor oil of the Triumph Tiger 1050 Sport?
How do you replace the motor oil of the Triumph Tiger 1050 Sport?
Tiger 1050 Sport In order to perform the oil change on the Triumph Tiger 1050 Sport, you will need to loosen the oil tank drain plug located in the central lower part…
How do you replace the rear shock absorber of the Triumph Tiger 1050 Sport?
How do you replace the rear shock absorber of the Triumph Tiger 1050 Sport?
Tiger 1050 Sport In order to replace the rear shock absorber of the Triumph Tiger 1050 Sport, you will first need to remove the old one: it will be located between th…
How to Change the Engine Oil in a Triumph Tiger Sport 1050
How to Change the Engine Oil in a Triumph Tiger Sport 1050
Tiger 1050 Sport This tutorial shows how to change the engine oil in a Triumph Tiger Sport 1050, a very simple and quick operation to perform every 12 months. First, …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos