Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Triumph Tiger 800 Xrx

Model: Triumph Tiger 800 Xrx
Part: Service warning light

Video tutorial

In a few simple steps, we will see the instructions for resetting the service light for the regular maintenance oil change on the Triumph Tiger 800 Xrx. First, place the motorcycle on the stand and start by removing the passenger seat and then the rider's seat; then connect your diagnostic software to the OBD port of the ECU, as shown in the video.

At this point, select the brand and model of the motorcycle, following the guided procedure to confirm and perform the reset of the service light (resetting the warning on the instrument panel).


Posted on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Coolant of the Triumph Tiger 800 Xrx
How to Replace the Coolant of the Triumph Tiger 800 Xrx
Tiger 800 Xrx Today's steps will show you how to remove and replace the coolant of the Triumph Tiger 800 Xrx, following the instructions below. First, place the mo…
How to replace the engine oil in the Triumph Tiger 800 XRX?
How to replace the engine oil in the Triumph Tiger 800 XRX?
Tiger 800 Xrx In this tutorial we can see how to replace the engine oil in the Triumph Tiger 800 XRX, an extremely simple and fast operation. First of all, we wait…
How to replace the spark plug on the Triumph Tiger 800 XRX?
How to replace the spark plug on the Triumph Tiger 800 XRX?
Tiger 800 Xrx To replace the spark plug on the Triumph Tiger 800 XRX, loosen the screws securing the covers at the front of the bike around the fuel tank. Once the…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos