Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank on Triumph Tiger 800 XC

Model: Triumph Tiger 800 Xc
Part: Exhaust muffler

Video tutorial

Remove the plastic cover attached to the front beak, which includes both front side panels. Unscrew and remove, as shown in the video, first the two protective panels and the mudguard beak, then the side panels and the duct.

Be careful with the indicator connections; before removing them, remember that the connections are: black to black, red and green to white. Remove the seat by taking out the two screws that hold it in place and the two small plastic covers on either side.

Now you can unscrew and remove the fuel tank, disconnecting the hoses and connectors in the process.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank from the Triumph Tiger 800?
How to Remove the Fuel Tank from the Triumph Tiger 800?
Tiger 800 Xc To remove the fuel tank from the Triumph Tiger 800, first detach the plastic covers that wrap around the sides of the fuel tank to access the side fi…
How to Remove the Fuel Tank from a Triumph Tiger 800 XC
How to Remove the Fuel Tank from a Triumph Tiger 800 XC
Tiger 800 Xc To remove the fuel tank from the Triumph Tiger 800 XC, first loosen the screws located just under the handlebars. Additional screws to loosen will be…
Replacing the Coolant on the Triumph Tiger 800
Replacing the Coolant on the Triumph Tiger 800
Tiger 800 Xc This guide shows you how to bleed the cooling circuit and replace the antifreeze on a Triumph Tiger 800. First, disconnect the coolant hose; then loo…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos