Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fluid on a Triumph Tiger 800

Model: Triumph Tiger 800 Xc
Part: Radiator

Video tutorial

It is recommended to change the coolant every 18,640 miles for those who own this model of motorcycle or similar. To drain the existing coolant from the motorcycle, you need to access the left side, and obviously at the bottom, of the bike.

Here, where the hose connects to the radiator, you will notice a clip that you need to remove. Collect the old coolant in a container and dispose of it properly.

On the right side of the motorcycle, just above the radiator, you can top up the new fluid: do this until clean, new fluid comes out of the drain hole. Tighten the holes and you're done.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Replacing the Coolant on the Triumph Tiger 800
Replacing the Coolant on the Triumph Tiger 800
Tiger 800 Xc This guide shows you how to bleed the cooling circuit and replace the antifreeze on a Triumph Tiger 800. First, disconnect the coolant hose; then loo…
How to Replace the Coolant in a Triumph Tiger 800
How to Replace the Coolant in a Triumph Tiger 800
Tiger 800 Xc In this video tutorial, learn how to replace the coolant in a Triumph Tiger 800 by following these simple and quick steps. First, place your motorcyc…
How to Replace the Engine Oil and Oil Filter on a Triumph Tiger 800
Tiger 800 Xc To ensure the longevity of your engine, it is necessary to regularly perform routine maintenance; here’s how to replace the engine oil and oil filter…

How to Replace the Front Headlight on a Husqvarna 701?

To replace the front headlight on a Husqvarna 701, first loosen the screws that secure the front fairing laterally. Once the screws are loosened, you can detach the fairing and subsequently disconnect all the connectors attached inside. Once the fairing is released, loosen the screws located inside to completely detach the old headlight from the fairing. At this point, insert the new headlight, connect it and secure it with screws, then reinstall the fairing in the corresponding housing.

Watch the video!


by ScegliAuto

More videos