Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Triumph Bonneville T100

Model: Triumph Bonneville T100
Part: Battery

This video is currently unavailable

First, remove the seat using the appropriate key. Unscrew the negative terminal (always the negative first) with a cross-head screwdriver. Disconnect the USB connector, then unscrew the positive terminal (the screw under the red cap). Using a Torx screwdriver, unscrew the bolt securing the battery.

Move the box above the battery, and if you can't move it enough, disconnect the cables. Remove the battery securing strap and take it out. For safety, after disconnecting the terminals, place a piece of cardboard underneath to prevent them from making contact.


Updated on 7 April 2026 by ScegliAuto


Related tutorials

How to disassemble the fuel tank of the Triumph Bonneville T100
How to disassemble the fuel tank of the Triumph Bonneville T100
Bonneville T100 The instructions in this guide will show us the process of disassembling and replacing the fuel tank of the Triumph Bonneville T100 motorcycle. First…
How to Replace the Front Headlight on a Triumph Bonneville T100?
How to Replace the Front Headlight on a Triumph Bonneville T100?
Bonneville T100 In this tutorial, we can see how to replace the front headlight on a Triumph Bonneville T100, an extremely simple and quick operation. First, ensure …
How to Replace the Oxygen Sensor on the Triumph Bonneville T100
How to Replace the Oxygen Sensor on the Triumph Bonneville T100
Bonneville T100 Briefly follow these instructions to remove and replace the oxygen sensor on the Triumph Bonneville T100 motorcycle. First, place the bike on the cen…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos