Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Triumph Tiger 800?

Model: Triumph Tiger 800 Xc
Part: Air filter

Video tutorial

To replace the air filter, remove the seat to access the screws securing the fuel tank. Before removing the tank, unscrew the bolts fixing the side panels around it. Now, you can lift the tank after disconnecting the hoses and access the underlying components: here is the air filter box, which must be opened to remove the filter inside.

Once the new filter is installed, refit all the removed components.


Updated on 8 May 2026 by ScegliAuto


Related tutorials

Removing the Air Filter on a Triumph Tiger 800 Xc
Removing the Air Filter on a Triumph Tiger 800 Xc
Tiger 800 Xc Remove the original engine air filter on a Triumph Tiger 800 Xc. Follow this guide to proceed with the replacement. Position the motorcycle on a cent…
Replace the Engine Oil and Oil Filter on the Triumph Tiger 800
Replace the Engine Oil and Oil Filter on the Triumph Tiger 800
Tiger 800 Xc Changing the engine oil and oil filter is necessary to ensure the engine operates correctly. Start by placing your motorcycle on the centre stand and…
How to Replace the Air Filter on a Tiger 800 XC
How to Replace the Air Filter on a Tiger 800 XC
Tiger 800 Xc Replace the air filter on a Tiger 800 XC. Follow this guide video for the air filter replacement procedure. Position the motorcycle on the centre sta…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos