Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Triumph Bonneville

Model: Triumph Bonneville
Part: Battery

Video tutorial

Today, we will see how to remove and replace the battery on a Triumph Bonneville motorcycle, following the instructions below. First, remove the seat from the motorcycle; then you will find the battery directly underneath.

Unscrew the terminal screws (positive and negative) with a screwdriver or a 10 mm socket, as shown in the video. At this point, remove the small cover and extract the battery from the battery holder; replace it with a new one of the correct type and with the same amperage as the original!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Triumph Bonneville Bobber?
How to Replace the Battery on a Triumph Bonneville Bobber?
Bonneville To replace the battery on a Triumph Bonneville Bobber, you need to loosen the screws that secure the cover located on the right side of the bike, jus…
Replacing the Battery in a Triumph Bonneville
Replacing the Battery in a Triumph Bonneville
Bonneville In this video tutorial, you will find instructions for removing and replacing the battery in a Triumph Bonneville motorcycle. First, place the bike o…
How to Change the Engine Oil on a Triumph Bonneville?
How to Change the Engine Oil on a Triumph Bonneville?
Bonneville To change the engine oil on a Triumph Bonneville, access the lower part of the motorcycle at the front, where you will find the oil drain plug. Once …

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos