Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the clutch in the Triumph Tiger 1050, unscrew the bolts securing the cover on the right side of the bike, near the seat. Once the cover is removed, you can access the underlying clutch, which must be extracted from its housing by unscrewing all the corresponding fixing screws. After the old clutch is removed, insert the new one into the cover, securing it with the appropriate screws and reinstalling the cover.

Updated on 28 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Triumph Tiger 1050?
How do you replace the clutch of the Triumph Tiger 1050?
Tiger 1050 Sport The clutch replacement on the Triumph Tiger 1050 is done by loosening the bolts that secure the cover located on the right side of the motorcycle, at…
How to Replace the Clutch on a Triumph Tiger 1050?
How to Replace the Clutch on a Triumph Tiger 1050?
Tiger 1050 Sport To replace the clutch on a Triumph Tiger 1050, unscrew the bolts securing the cover on the right side of the bike, at the level of the seat. Once thi…
How do you replace the rear shock absorber of the Triumph Tiger 1050 Sport?
How do you replace the rear shock absorber of the Triumph Tiger 1050 Sport?
Tiger 1050 Sport In order to replace the rear shock absorber of the Triumph Tiger 1050 Sport, you will first need to remove the old one: it will be located between th…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos