Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides instructions on how to disassemble and replace the front brake pads on the Triumph Bonneville T140. First, place your motorcycle on the centre stand and begin by removing the front brake caliper; then remove the old brake pads as shown in the video. At this point, clean the caliper of any residual dirt by pressing the caliper piston to retract it; then install the new original brake pads, following the video tutorial to the end for reassembly!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Triumph Bonneville T140
How to Change the Engine Oil on the Triumph Bonneville T140
Bonneville T140 You can change the engine oil on the Triumph Bonneville T140 by loosening the drain plug of the oil sump, located at the bottom centre of the vehicle…
How do you replace the piston of the Triumph Bonneville T140?
How do you replace the piston of the Triumph Bonneville T140?
Bonneville T140 In order to replace the piston of the Triumph Bonneville T140, first you will need to remove the engine block from its housing in the center of the f…
How do you disassemble the engine of the Triumph Bonneville T140?
How do you disassemble the engine of the Triumph Bonneville T140?
Bonneville T140 In order to disassemble the engine of the Triumph Bonneville T140, you need to loosen the screws that fix the engine block to its housing in the cent…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos