Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these instructions to remove and replace the battery of the Triumph Bonneville T120 motorcycle by following these simple steps. First, place the motorcycle on the centre stand and begin by removing the rider's and passenger's seat. Next, disconnect both battery terminals (positive and negative) to remove it from its compartment, as shown in the video. At this point, install the new battery of the correct type and with the same amperage, making the electrical connection; then check the engine ignition!

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Triumph Bonneville T120?
How to replace the battery of the Triumph Bonneville T120?
Bonneville T120 On the Triumph Bonneville T120, the installed battery can be replaced by loosening the screws that secure the device to its housing, which is located…
How do you replace the battery of the Triumph Bonneville T120?
How do you replace the battery of the Triumph Bonneville T120?
Bonneville T120 The procedure for replacing the battery installed on the Triumph Bonneville T120 can be carried out by loosening the screws that secure the device to…
How to Replace the Coolant in a Triumph Bonneville T120?
How to Replace the Coolant in a Triumph Bonneville T120?
Bonneville T120 In this guide, we will look at the main steps to replace the coolant or antifreeze in a Triumph Bonneville T120 motorcycle. First, remove the seat of…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos