Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Tiger 900
Part: Engine oil

To change the oil on the Triumph Tiger 900, follow these steps. First, make sure the engine is warm but not too hot. Lift the bike on a center or side stand to make it stable. Locate the oil drain plug on the engine crankcase, usually located on the lower side of the engine. Place an oil collection container under the drain plug and unscrew the plug to drain the used oil. Once the oil is completely drained, remove and replace the oil filter. Make sure to lubricate the seal ring of the new filter before installing it. Screw the oil drain plug back in and make sure it is securely tightened. Next, locate the oil fill plug on the engine and remove it. Fill the engine with new motor oil, using the oil recommended in the owner's manual. Check the oil level using the dipstick and add oil if necessary to reach the correct level. Finally, screw the oil fill plug back in, start the engine and check for any oil leaks. Check the oil level again and add oil if necessary. Once the procedure is complete, dispose of the used oil properly at an authorized recycling center.


Posted on 21 April 2024 by ScegliAuto



How to change the engine oil of a Triumph Tiger 900?
Tiger 900 To change the engine oil of a Triumph Tiger 900, follow these steps. First, make sure the engine is cold. Lift the motorcycle on a central or side st
How to replace the engine oil in the Triumph Tiger 900?
Tiger 900 In this tutorial we can see how to replace the engine oil in the Triumph Tiger 900, an extremely simple and fast operation. First of all, we wait for
How to replace the engine oil in the Triumph Tiger 900 Rally Pro?
Tiger 900 In this tutorial we can see how to replace the engine oil in the Triumph Tiger 900 Rally Pro, an extremely simple and quick operation. First of all,

How do you replace the exhaust pipe of the TM Racing 125?

To replace the exhaust of the TM Racing 125, you need to loosen the screws that secure the side panel of the rear fender: once this panel is removed, you can unscrew the screws that hold the exhaust supports and also widen the connecting clamp between the end cap and the collector. Once the old exhaust is freed, it can be completely removed from its seat so that the new one can be inserted: this must be properly secured and covered by the appropriate panel.

Watch the video!


by ScegliAuto

More videos