Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Triumph
    3. : Thruxton 900

Triumph Thruxton 900 - Videoguide

Triumph Thruxton 900
How do you replace the exhaust pipe of the Triumph Thruxton 900?
The replacement of the exhaust pipe on the Triumph Thruxton 900 is done by loosening the bolts that fix the initial part of the exhaust duct, immediately …read all…
Posted on 17 June 2023 by ScegliAuto
Triumph Thruxton 900
How to replace the front headlight on the Triumph Thruxton 900?
As we can see in this tutorial, replacing the front headlight on the Triumph Thruxton 900 is an extremely simple and quick operation. First of all, make sure …read all…
Posted on 18 May 2023 by ScegliAuto
Triumph Thruxton 900
How do i change the Triumph Thruxton 900 engine oil?
In order to replace the Triumph Thruxton 900 engine oil, you need to unscrew the oil drain plug located in the lower part of the bike: once the plug is open, …read all…
Posted on 31 May 2022 by ScegliAuto
Triumph Thruxton 900
How to replace the exhaust on the Triumph Thruxton 900?
In order to replace the muffler of the Triumph Thruxton 900 you have to loosen the screws that secure the initial part of the exhaust duct, which is …read all…
Posted on 28 April 2024 by ScegliAuto
Headlight (1) Muffler (2) Engine oil (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos