|
Do it yourself
| |||
| ||||
|
Model: (Various brands) Various
In this video, we will see how to change the motor oil on a scooter: in general, the method is the same on almost all models, with few variations. The oil must be warm during the work, so that it is easier to drain it: it is also necessary to unscrew the dipstick. Take the tray where to drain the used oil - which will then be disposed of at an authorized center - clean the plug screw well and reassemble it before any contaminants enter the oil pan. Now we drain the oil from the mesh filter, being careful of the spring contained in it, and then clean it well before closing the plug carefully. We then have another filter, closed by three bolts, which we unscrew; clean the oil with a piece of paper and then replace the filter, check the integrity of the o-ring and close the plug carefully paying attention to the spring. Now it's time to refill with new oil, according to the manufacturer's specifications, loading 80% of the quantity, and then performing a check. While the engine is running, check for any leaks.
Posted on 13 September 2025 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
Today, you will learn the steps to change the engine oil while performing the regular maintenance service on a GY6 49cc-150cc scooter (Chinese scoote…
(Various brands) Various
The right amount of oil is very important whether it is a four-wheeled vehicle or a two-wheeled one, the motor oil in fact performs the function of l…
(Various brands) Various
In this video tutorial, you can see how to install grips and stabiliser weights on a scooter. The grips can be removed in several ways: First solutio…
|
Frequently Asked QuestionsHow to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |