Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The sprocket is one of the motorcycle components most subject to wear, so it is important to know how to change it. After placing the motorcycle on a stand, put it in gear. Use a socket spanner to remove the nut and take it off. Do the same with the washer and the sprocket, using lubricant if necessary. Now, clean and dry both the washer and the nut, take the new sprocket, and install it. Apply some thread lock to the nut, then reposition it along with the washer, tightening it with a torque wrench.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Sprocket on a Benelli TRK 502 X
How to Replace the Sprocket on a Benelli TRK 502 X
(Various brands) Various This video explains how to replace the sprocket on a Benelli TRK 502X. First, you will need a torque wrench, a new sprocket, and pointed pliers to re…
How Does the Starter Motor Work and What Causes Failures?
How Does the Starter Motor Work and What Causes Failures?
(Various brands) Various The starter motor is an electric motor that starts the internal combustion engine of a vehicle when you turn the key or press the start button. The s…
How Do Car Starter Motors Work?
How Do Car Starter Motors Work?
(Various brands) Various In today's article, we will see how the car starter motor works. When the key is inserted into the ignition lock, a signal is sent to the battery, wh…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos