Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Sprocket on a Benelli TRK 502 X

Model: (Various brands) Various

This video explains how to replace the sprocket on a Benelli TRK 502X. First, you will need a torque wrench, a new sprocket, and pointed pliers to remove the circlip. Place the bike on a flat surface and on a stand, remove the cover directly above the sprocket using the torque wrench, remove the circlip (elastic stop ring) with pointed pliers, hold the sprocket shaft steady, and proceed to unscrew the nuts (considerable force is required) of the sprocket using the torque wrench, and finally, proceed with the replacement.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the engine control unit of the Benelli TRK 502
Resetting the engine control unit of the Benelli TRK 502
(Various brands) Various The video shows how to reset the engine control unit of the Benelli TRK 502. This is a very simple operation that you can do yourself, saving a lot o…
How to Manually Set the Time on the Benelli TRK 251
How to Manually Set the Time on the Benelli TRK 251
(Various brands) Various If the display on your Benelli TRK 251 shows a different time than the correct one and you want to change it manually, you need to follow a simple pr…
How to Change a Motorcycle Sprocket
How to Change a Motorcycle Sprocket
(Various brands) Various The sprocket is one of the motorcycle components most subject to wear, so it is important to know how to change it. After placing the motorcycle on a…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos