Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Lance Cali Classic 125 scooter, an extremely simple and quick operation, to be carried out every 12 months. First of all, we wait for the engine to be cold enough, then we position a container underneath it, locate the drain hole bolt and unscrew it using a 17mm socket wrench. We then let all the oil in the system drain out, open the filter housing and clean it from any dirt residue. At this point, we can reassemble everything and pour in the new oil through the appropriate hole.

Posted on 1 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from a Scooter
Removing the Starter Motor from a Scooter
(Various brands) Various In this tutorial video, you will learn how to remove and replace the starter motor in a generic scooter; the procedure may vary from scooter to scoot…
How to replace the air filter in the Herald Classic 125?
How to replace the air filter in the Herald Classic 125?
(Various brands) Various In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself o…
How to change the motor oil on the scooter
How to change the motor oil on the scooter
(Various brands) Various In this video, we will see how to change the motor oil on a scooter: in general, the method is the same on almost all models, with few variations. Th…

    Frequently Asked Questions

    • Vari - How much oil is needed for the Harley-Davidson Fat Boy? Read answer
    • Vari - What does the "Oil Insp" message mean? Read answer

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos