Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to disassemble the TM Racing KZ10B engine, first you need to remove it from its housing compartment, unscrewing the screws that fix it to the corresponding supports: once the screws and also the tubes and connectors connected to it have all been removed, it will be possible to proceed by loosening the screws that fix the cylinder head and the valve cover. Then, by removing the cylinder, it will be possible to locate the piston inside, which can be detached from the connecting rod in order to replace it with a new one; all other components can be replaced with new spare parts.

Posted on 22 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the TM Racing KZ10B engine?
How do you disassemble the TM Racing KZ10B engine?
(Various brands) Various The disassembly of the TM Racing KZ10B engine can be carried out by first removing it from its housing compartment, loosening the screws that fasten …
How to Replace the Piston on a TM Racing KZ10B Engine
How to Replace the Piston on a TM Racing KZ10B Engine
(Various brands) Various To replace the piston on the TM Racing KZ10B engine, you need to loosen the screws that secure the engine cylinder to its housing: before removing th…
How to Dismantle the TM Racing Engine?
How to Dismantle the TM Racing Engine?
(Various brands) Various To dismantle the TM Racing engine, loosen the screws securing the two side casings of the engine block and remove them completely. Then, proceed to d…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos