Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the TM Racing Engine?

Model: (Various brands) Various
Part: Engine

Video tutorial

To dismantle the TM Racing engine, loosen the screws securing the two side casings of the engine block and remove them completely. Then, proceed to detach them and subsequently remove the spark plug and cylinder.

Once these are removed, detach the piston from the conrod by removing the ring and pin; then all other underlying components can be removed and potentially replaced with new spare parts. After the replacement, reassemble all parts, securing them in their housing.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Dismantle the TM Racing KZ Engine?
How to Dismantle the TM Racing KZ Engine?
(Various brands) Various To dismantle the TM Racing KZ engine, first remove it from its housing by loosening the screws that secure it to the supports and disconnecting all c…
How to Dismantle the TM Racing KZ R1 Engine?
How to Dismantle the TM Racing KZ R1 Engine?
(Various brands) Various To dismantle the TM Racing KZ R1 engine, first remove the engine from its housing by unscrewing the bolts that secure it to the mounts and disconnect…
How to Dismantle the TM Racing K9B Engine
How to Dismantle the TM Racing K9B Engine
(Various brands) Various To dismantle the TM Racing K9B engine, remove it from its housing: once the screws securing the engine to its mount and the fixing screws have been r…

How to Change the Engine Oil on a Kawasaki Ninja 650?

To change the engine oil on a Kawasaki Ninja 650, it is important to start by warming up the engine for a few minutes, so the oil becomes more fluid and easier to drain. Position the bike on a stable stand, such as a centre or side stand. Locate the oil drain plug at the bottom of the engine and place a container underneath to collect the used fluid. Carefully unscrew the plug, allowing the old oil to drain completely. Once emptied, screw the plug back in, ensuring it is tight to avoid leaks. Proceed to add new oil through the top opening of the reservoir, following the type and quantity recommended by the manufacturer. After filling, start the engine to circulate the fresh oil, then turn it off and check the level, adding more if necessary to reach the optimal level.

Watch the video!


by ScegliAuto

More videos