Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the stator on a Harley Davidson Dyna, you need to loosen the screws securing the transmission cover located on the right side of the bike: once this cover is removed, you can access the underlying components. You will need to loosen the central nuts that secure the variator and the clutch, removing them along with the chain; beneath the variator, you will find the stator, which can then be extracted and replaced with a new one. After replacement, remount the transmission components, ensuring everything functions correctly.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Stator on Harley Davidson Dyna 05
How to Replace the Stator on Harley Davidson Dyna 05
Dyna In this video, you will find instructions for removing and replacing the stator on the Harley Davidson 05 Dyna, following these simple steps. First, …
How to Replace the Battery on a Harley Davidson Dyna
How to Replace the Battery on a Harley Davidson Dyna
Dyna Below are the instructions for removing and replacing the battery on a Harley Davidson Dyna motorcycle. First, place the bike on a stand and start by…
How to Replace the Rear View Mirror on the Harley Davidson Dyna?
How to Replace the Rear View Mirror on the Harley Davidson Dyna?
Dyna To replace the rear view mirror on the Harley Davidson Dyna, loosen the nut that secures it from the bottom of its housing, which is located above th…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos