Do it yourself
Frequently asked questions about cars and motorcycles

How to program the Nice remote control

Model: (Various brands) Various
Part: Key

Video tutorial

Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control.

To carry out the programming, we need to position ourselves in front of the gate and press and hold the button of the new remote control. After six seconds, press the button of the old remote control three times in a row. Release the button and then press it again, thus programming the remote control and the gate will open without any problems.

If the remote control is not programmed, you can try programming it a second time after waiting for 10 minutes.


Posted on 5 December 2024 by ScegliAuto


Related tutorials

(Various brands) Various With the help of the attached video tutorial, you can successfully program a Nice remote quickly and without complicated steps. Here’s what to do: ne…
(Various brands) Various This guide shows you how to programme a second Nice remote control: you need one working remote, the new one to programme, and to be within 1-2 metre…
(Various brands) Various The remote control mentioned is primarily used to open or close electric gates and is, like any remote control in circulation, programmable. For thos…

How to Open the Fuel Flap and Cap on an MG HS

This guide will show you how to open the fuel flap and cap on an MG HS in simple steps. To open the fuel flap, ensure the vehicle is unlocked; then press on the edge of the flap to open it, as shown in the video. Next, unscrew the fuel cap counterclockwise to refuel at the pump; once finished, screw the cap back on until it clicks, and finally close the fuel flap!

Watch the video!


by ScegliAuto

More videos