Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to improve the smoothness of seat belts with little expense

Model: (Various brands) Various
Part: Checks and maintenance

In this video we can see a very simple method to always keep the seatbelt retraction of an older car smooth, where the problem often arises with seatbelts getting stuck, hanging loose, or having difficulty retracting. All you need is a couple of microfiber cloths and a can of silicone spray. First, clean the entire length of the seatbelt thoroughly with one of the cloths, pulling it out completely (it may be helpful to have a friend hold it taut); then spray it well with the silicone spray, without overdoing it. Use the other cloth to spread the silicone evenly and let it dry before retracting the belt back into the retractor. Now the belt retracts smoothly.

Posted on 27 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to improve the smoothness of a van door.
How to improve the smoothness of a van door.
(Various brands) Various In this video, we can see how to improve the sliding of a van door. Almost always, the middle door of a van slides, regardless of the brand, but to f…
How Does an Oil-Bath Timing Belt Work? Any Issues?
How Does an Oil-Bath Timing Belt Work? Any Issues?
(Various brands) Various The timing belt (or chain) is a fundamental component of your car. It synchronises the crankshaft with the cylinder head. Normally, in our engines, t…
The reason why repaired seat belts are stuck
The reason why repaired seat belts are stuck
(Various brands) Various In this video we can see the reason why our seat belts, which have been retracted and just need to be put back in place on the vehicle, seem not to w…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos