Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the tire pressure sensor on a vehicle

Model: (Various brands) Various
Part: Tire pressure warning light

Video tutorial

Today we will explain how to replace the tire pressure sensor on a vehicle. We start by removing the tires from their seat, then we lift the car and unscrew the bolts on the rims, then remove the tires.

We continue by removing the valve stem cores to release the air using a silicone spread to facilitate the break. We then remove the sensor and insert the new one. Inflate the tires and perform the sensor programming.

To program the sensors, it is necessary to use a diagnostic computer that once connected to the vehicle by entering the serial code of the sensor will program it. Once the sensor is programmed, we mount the tires on the vehicle and update the tire pressure on the tpms menu.


Posted on 29 October 2025 by ScegliAuto


Related tutorials

How to Replace the Tyre Pressure Sensors on Your Vehicle
How to Replace the Tyre Pressure Sensors on Your Vehicle
(Various brands) Various When the tyre pressure warning light activates on a vehicle, it means you need to check the tyre pressures and adjust them using an air compressor an…
How to replace the vehicle's tire pressure sensor
How to replace the vehicle's tire pressure sensor
(Various brands) Various Today we will explain how to independently replace the tire pressure sensor on the wheels of a vehicle. The sensors must be replaced when they stop w…
How to program the tire pressure sensor using Autel Maxi TS408
How to program the tire pressure sensor using Autel Maxi TS408
(Various brands) Various When we want to update or program the tire pressure sensor on any vehicle we own, we must use the Autel Max model TS 408 tool. We connect the updatin…

Other guides you may be interested in

How to adjust the handbrake on the Smart Fortwo?

To adjust the handbrake on the Smart Fortwo, loosen the screws securing the left rear wheel so that it can be removed: after the wheel has been removed from its seat, loosen the screws securing the corresponding brake drum, locating the shoes and the handbrake mechanism. This can be adjusted by tightening or loosening the shoes to regulate the intensity of the handbrake; once the adjustment is complete, verify that the operation has been successfully finished.

Watch the video!


by ScegliAuto

More videos