Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Boot Fuse in the Opel Zafira

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuse box

See other generations:
Video tutorial

If the boot of your 2006 Opel Zafira no longer opens automatically, the issue may be a damaged fuse due to wear. In this case, turn off the car and open the bonnet.

Go to the fuse box located on the right side near the engine to check its condition. Using flat-nosed pliers, remove the damaged fuse as shown in the tutorial video, and insert the new fuse into the appropriate slot.

Now, check that your boot opens smoothly.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Where is the Windscreen Washer Pump Fuse on the Opel Zafira?
Where is the Windscreen Washer Pump Fuse on the Opel Zafira?
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) The Opel Zafira model B has two fuse boxes. The first fuse box is located under the bonnet, specifically near the battery. The second fuse box is loc…
Fuse Box Diagram for the Opel Zafira B
Fuse Box Diagram for the Opel Zafira B
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) This video shows the location of the fuse boxes for the Opel Zafira B, explaining the assignment of all fuses along with the amperage rating of each …
How to replace the cigarette lighter fuse on an Opel Zafira
How to replace the cigarette lighter fuse on an Opel Zafira
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Before you can start, open the bonnet of your Opel Zafira. The fuse box is located on the left side of the engine bay. Begin by unclipping the top co…

    Frequently Asked Questions

    • Zafira 2005-2011 - What is the power steering fuse on Opel Zafira B? Read answer

How to reset the tyre pressure warning light on the Dacia Sandero?

The tyre pressure warning light that appears on the instrument cluster of the Dacia Sandero can be reset by inflating the tyres until they reach the correct pressure value: this value is indicated on the sticker attached to the driver’s door pillar. Once the inflation is complete, navigate through the menu that appears on the instrument cluster to find the option related to the tyres: select this with the OK button, which should then be held down for a few seconds to completely turn off the light.

Watch the video!


by ScegliAuto

More videos