Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb of the Scania R 500

Model: (Various brands) Scania
Part: Headlight bulb

These brief and simple instructions will illustrate how to remove and replace the headlamp bulb of the Scania R 500. First, move to the front and start unscrewing the fixing screws located on the side of the headlight unit; remove the plastic cover to take out the headlamp, removing the internal plastic protection and unhooking the metal clip to remove the dipped and main beam bulbs, as shown in the video. Install the new bulb, check its operation, and reassemble the headlight unit; the replacement of the rear lights is also illustrated.

Posted on 24 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the bulb in a new generation Scania headlight
How to change the bulb in a new generation Scania headlight
(Various brands) Scania In this video we can see how to change the headlight bulb of a new generation Scania vehicle. We will need the tray kit, which is generally contained…
In the Scania r450, how do you replace a headlight bulb?
In the Scania r450, how do you replace a headlight bulb?
(Various brands) Scania The Scania r450 is a truck, also known as a heavy vehicle, and today we will see how to replace one of the bulbs in the front headlight. The video av…
What is the fuse diagram for the Scania Series R?
What is the fuse diagram for the Scania Series R?
(Various brands) Scania In this video, we can see the location of the fuse box and its corresponding diagram in the Scania Series R, useful in case a device shows signs of m…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos