Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear light bulbs on a Rover 75

Model: (Various brands) Rover 75 MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Tail light bulb

Video tutorial

In this guide, discover the steps that will allow you to dismantle and replace the bulbs of the rear light on a Rover 75. First, open the rear boot and start removing the side trim to access the bulb holder; unscrew the plastic screws to separate the bulb holder from the light unit, as shown in the video.

At this point, replace any faulty bulbs with new ones of the correct type and fitting; reassemble the bulb holder and connect it, testing the correct operation of the lights.


Posted on 5 October 2026 by ScegliAuto


Related tutorials

(Various brands) Rover 75 (1999-2005 / MK 1) To replace the front headlamp bulb on a Rover 75, you need to remove the inner wheel arch cover corresponding to the bulb being replaced. Once the co…
(Various brands) Rover 75 (1999-2005 / MK 1) To replace the front brake pads on the Rover 75, lift the car so that the corresponding wheel is not in contact with the ground. Once the wheel bolts…
(Various brands) Rover 75 (1999-2005 / MK 1) To access all the fuses in your Rover 75, carefully read the following guide and apply the various steps described. First, enter the car from the pas…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos