Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Ford spare wheel removal

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Wheel
Operation: Ford spare wheel removal

In this video guide we will show you the basic steps and the main operations that you must perform whenever you need to change the spare wheel of your vehicle, especially on Fords. It is obviously necessary to have all the tools on board including the spare wheel, the hydraulic jack and the appropriate keys. The spare wheel is located in the trunk by lifting the compartment from the handle: we unscrew the central bolt and lift the wheel. To remove the wheel, simply lift the car with the hydraulic jack and unscrew the wheel bolts to replace it!


Posted on 13 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why is the spare wheel locked? Read Answer
    • Vari - How much does it cost to align the wheels? Read Answer
    • Vari - How do you remove the spare tire? Read Answer
    • Vari - How do you replace the hub pin of the car? Read Answer
    • Vari - Where are the TPMS located? Read Answer
    • Vari - Why doesn't the car wheel come off? Read Answer
    • Vari - What does 4 wheel drive mean? Read Answer
    • Vari - What does the acronym 4wd mean in Spanish cars? Read Answer
    • Vari - What should be the tightening value of the rear wheel hub nut? Read Answer
    • Vari - How do i remove the wheels of the Peugeot Speedfight 2? Read Answer
    • Vari - Why can't I remove the wheel? Read Answer
    • Vari - What is the tightening torque of the wheel bolts on a Chevrolet Kalos? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Wheel tightening torques on Volkswagen cars? Read Answer
    • Vari - Where can the tightening torques of the wheels be found? Read Answer
    • Vari - Where is the jack positioned to change the wheel? Read Answer
    • Vari - Where is the spare wheel located? Read Answer
    • Vari - Where is the wheel repair kit located? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos