Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How to reset the Jeep Renegade Passive Entry light

Jeep Renegade - Video tutorial

Model: Jeep Renegade - Years 2014-2021
Part: Key
Operation: How to reset the Jeep Renegade Passive Entry light

The guide shows how to reset the Passive Entry system, stylized by a key shaped light with three lines of WiFi is shown next to the mileage. This system allows the vehicle to be switched on without having to use the supplied keys. The reset must be performed keeping the keys inside the vehicle. In fact, with the instrument panel off, it will be necessary to press the ignition button located on the keys and then the brake pedal. At this point it is necessary to press the power button on the dashboard. At this point, wait five minutes before starting the vehicle normally.


Posted on 3 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - What to do when your Jeep renegade won't turn off? Read Answer
    • Jeep Renegade 2014-2023 - How can the Jeep renegade be turned on? Read Answer
    • Jeep Renegade 2014-2021 - What does the Keyless error mean on my Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - How does the power button work in a Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why is the electronic key no longer detected in the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - What to do if the Jeep Renegade remote control doesn't work? Read Answer
    • Jeep Renegade 2014-2023 - What problems does the Jeep Renegade Keyless system have? Read Answer
    • Jeep Renegade 2014-2023 - How to replace the key battery of a Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - On the Jeep Renegade the electronic key is not detected, what can it be? Read Answer
    • Jeep Renegade 2014-2023 - How to remove the key battery of a Jeep Renegade? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos