Do it yourself
Frequently asked questions about cars and motorcycles
In today's video, see how to open the seat of the Piaggio Beverly if the service battery is flat. First, open the compartment located on the shield using the appropriate key. Inside, you will find a lever that you need to pull; simultaneously, release the seat by lifting it. These two actions together, with a bit of elbow grease, will allow you to open the seat in cases of extreme necessity. It is advisable to perform this operation only if absolutely necessary, as it may compromise the proper functioning of the mechanism in the long run.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Beverly 125 In this video, a siren is installed as an anti-theft device on this Piaggio Beverly; the control unit is mounted under the seat, in a dry area near t…
Beverly 125 In this new guide dedicated to your 2021 Piaggio Beverly, we will discover together how to replace the button battery inside the key. First of all, g…
Beverly 125 To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…

How to Change the Transmission Oil of the Harley Davidson Dyna

The procedure for changing the transmission oil should be carried out regularly to ensure the proper functioning of the engine; let’s see how to do it on the Harley Davidson Dyna. First, place your bike on a stand and start unscrewing the transmission oil drain bolt, allowing it to drain into a container for about ten minutes; then unscrew the filler cap to let the oil flow out more quickly. At this point, top up with the new transmission oil specified in the owner’s manual, pouring in the correct amount!

Watch the video!


by ScegliAuto

More videos