Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Piaggio
  4. : Beverly 125

Piaggio Beverly 125 - Video guides

Piaggio Beverly 125
How to Change the Gearbox Oil in a Piaggio Beverly 125

To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once the screw …Read all…
Posted on 22 February 2026 by ScegliAuto
Piaggio Beverly 125
How to install an alarm on a Piaggio Beverly

In this video, a siren is installed as an anti-theft device on this Piaggio Beverly; the control unit is mounted under the seat, in a dry area near the …Read all…
Posted on 6 October 2025 by ScegliAuto
Piaggio Beverly 125
How do you set the clock on the Piaggio Beverly 125?

In order to adjust the clock of the Piaggio Beverly 125, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot: …Read all…
Posted on 30 November 2024 by ScegliAuto
Piaggio Beverly 125
How to replace the key battery on a Piaggio Beverly

In this new guide for your 2021 Piaggio Beverly, you will learn how to replace the button battery inside the key. First, obtain a small flat screwdriver and …Read all…
Posted on 13 September 2026 by ScegliAuto
Piaggio Beverly 125
How to remove the rear wheel of the Piaggio Beverly 125?

To remove the rear wheel of the Piaggio Beverly 125, loosen the bolts that secure the exhaust to its housing on the right side of the bike near the rear wheel: …Read all…
Posted on 11 September 2026 by ScegliAuto
Piaggio Beverly 125
How to replace the air filter on a Piaggio Beverly 125?

To replace the air filter on a Piaggio Beverly 125, loosen the screws securing the protective panel of the air filter box: you can do this by unscrewing the …Read all…
Posted on 5 September 2026 by ScegliAuto
Piaggio Beverly 125
How to Set Time and Background Light on a Piaggio Beverly

In this video, learn how to set the time and background light on the Piaggio Beverly: turn on the ignition by placing the key in the "on" position; press and …Read all…
Posted on 30 August 2026 by ScegliAuto
Piaggio Beverly 125
Replacing the Belt on the Piaggio Beverly 125

In this brief and simple guide, you will learn how to dismantle and replace the drive belt on the Piaggio Beverly 125 scooter, following the instructions …Read all…
Posted on 21 July 2026 by ScegliAuto
Piaggio Beverly 125
How to Fit the Windscreen on a Piaggio Beverly

Once you have obtained the fitting kit and the windscreen (costs £58.00 on eBay for the original Piaggio, with free delivery), proceed as follows. Start by …Read all…
Posted on 19 July 2026 by ScegliAuto
Piaggio Beverly 125
How to reset the service light on the Piaggio Beverly 125

In this new mini guide for Piaggio Beverly 125 owners, you will discover how to reset the service light without using diagnostic tools. First, place the …Read all…
Posted on 16 September 2026 by ScegliAuto
Piaggio Beverly 125
How to Change the Engine Oil on a Piaggio Beverly 125

In this guide, you will discover how to perform the engine oil change as part of the regular maintenance service on a Piaggio Beverly 125 scooter. First, place …Read all…
Posted on 23 August 2026 by ScegliAuto
Piaggio Beverly 125
How to open the seat of the Piaggio Beverly with a flat battery

In today's video, see how to open the seat of the Piaggio Beverly if the service battery is flat. First, open the compartment located on the shield using the …Read all…
Posted on 14 July 2026 by ScegliAuto
Piaggio Beverly 125
How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?

To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. Next, you …Read all…
Posted on 1 June 2026 by ScegliAuto
Piaggio Beverly 125
How to Change the Engine Oil on a Piaggio Beverly

How to change the engine oil on a Piaggio Beverly 125? Follow this guide to proceed with the replacement. Position the scooter on its original stand, and using …Read all…
Posted on 26 March 2026 by ScegliAuto

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos