Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?

Model: Piaggio Beverly 125
Part: Light bulb

Video tutorial

To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. Next, you will need to remove the mirrors by simply rotating them.

Using a 17mm hex key, open the dashboard by separating the front plastic cover. By removing all the other screws shown in the video, you will gain access to the back of the bulb, which can then be extracted from its housing and replaced.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

Beverly 125 In this guide, you will discover how to perform the engine oil change as part of the regular maintenance service on a Piaggio Beverly 125 scooter. Fi…
Beverly 125 To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…
Beverly 125 In this brief and simple guide, you will learn how to dismantle and replace the drive belt on the Piaggio Beverly 125 scooter, following the instruct…

How to Replace the Gear Oil of the Piaggio Vespa PX 125

To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Watch the video!


by ScegliAuto

More videos