How to Change the Engine Oil on a Piaggio Beverly 125

Model: Piaggio Beverly 125
Part: Engine oil

This video is currently unavailable

In this guide, you will discover how to perform the engine oil change as part of the regular maintenance service on a Piaggio Beverly 125 scooter. First, place your scooter on the centre stand and start by unscrewing the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then, clean the drain plug thoroughly before reinserting it. At this point, unscrew the filler cap and pour in the new engine oil of the correct type; finally, check the level using the dipstick!

Updated on 15 June 2026 by ScegliAuto

Related tutorials

How to Change the Engine Oil on a Piaggio Beverly

Beverly 125 .. How to change the engine oil on a Piaggio Beverly 125? Follow this guide to proceed with the replacement... …

How to Change the Gearbox Oil in a Piaggio Beverly 125

Beverly 125 To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…

How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?

Beverly 125 To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. N…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!

by ScegliAuto

How to Change the Engine Oil on a Piaggio Beverly 125

Related tutorials

How to Reset the Service Light on a Vespa Sprint 150?

More videos