Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Belt on the Piaggio Beverly 125

Model: Piaggio Beverly 125
Part:

Video tutorial

In this brief and simple guide, you will learn how to dismantle and replace the drive belt on the Piaggio Beverly 125 scooter, following the instructions below. First, place the scooter on its centre stand and start by unscrewing the screws of the plastic cover of the transmission casing to remove it. Next, remove the casing and unscrew the nut of the fan and the one for the clutch, as shown in the video.

Once these components are removed, you can take off the drive belt and replace it with the new one. Refit the original belt in the correct direction, and finally, reattach the clutch and the fan!


Updated on 21 July 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Piaggio Beverly 125
Beverly 125 In this guide, you will discover how to perform the engine oil change as part of the regular maintenance service on a Piaggio Beverly 125 scooter. Fi…
How to reset the service light on the Piaggio Beverly 125
How to reset the service light on the Piaggio Beverly 125
Beverly 125 In this new mini guide for Piaggio Beverly 125 owners, you will discover how to reset the service light without using diagnostic tools. First, place …
How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?
How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?
Beverly 125 To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. N…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos