|
Do it yourself
| |||
| ||||
|
Model: Piaggio Beverly 125
In this new guide for your 2021 Piaggio Beverly, you will learn how to replace the button battery inside the key. First, obtain a small flat screwdriver and use it to easily remove the rear cover of the key. Once done, remove the motherboard and locate the exhausted battery at the back. Finally, replace the exhausted battery with a new one and reassemble the various components correctly. At this point, the procedure is successfully completed.
Updated on 13 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Beverly 125
In today's video, see how to open the seat of the Piaggio Beverly if the service battery is flat. First, open the compartment located on the shield u…
Beverly 125
To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. N…
Beverly 125
To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.300
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
