Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit the Windscreen on a Piaggio Beverly

Model: Piaggio Beverly 125
Part: Windshield

Video tutorial

Once you have obtained the fitting kit and the windscreen (costs £58.00 on eBay for the original Piaggio, with free delivery), proceed as follows. Start by mounting the nuts and washers onto the corner supports, then attach the tubes at the end; insert the supports that will hold the windscreen and the fixing screws halfway and at the bottom of the windscreen.

Now, pass the metal corner supports through, which will also be secured at the bottom using the appropriate screws. Using the Beverly supports, you can securely fasten the screws that will hold your windscreen in place during city traffic.

Tighten the screws further, and you're done.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

How to replace the key battery on a Piaggio Beverly
How to replace the key battery on a Piaggio Beverly
Beverly 125 In this new guide for your 2021 Piaggio Beverly, you will learn how to replace the button battery inside the key. First, obtain a small flat screwdri…
How to Change the Gearbox Oil in a Piaggio Beverly 125
How to Change the Gearbox Oil in a Piaggio Beverly 125
Beverly 125 To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…
How to Change the Engine Oil on a Piaggio Beverly 125
Beverly 125 In this guide, you will discover how to perform the engine oil change as part of the regular maintenance service on a Piaggio Beverly 125 scooter. Fi…

How to Dismantle the Engine of the TM Racing MX 125?

To dismantle the engine of the TM Racing MX 125, loosen the screws securing the side casing of the bike so that it can be removed, providing access to the clutch. Next, remove the spark plug from the top of the cylinder, then loosen the screws securing the cylinder as well: after removing the cylinder, you will be able to locate the piston underneath, which must be freed from the conrod by expanding its retaining ring. At this point, all further components within the engine block can be removed and replaced with new ones.

Watch the video!


by ScegliAuto

More videos