Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Beverly 125
Part: Wheel

To remove the rear wheel of the Piaggio Beverly 125, loosen the bolts that secure the exhaust to its housing on the right side of the bike near the rear wheel: once the exhaust is removed, you can locate the bolts that attach the wheel to its hub, loosening and removing all of them. After the bolts are loosened, the wheel can be detached from the swingarm, and you can insert the new replacement part: this should be secured with the appropriate bolts, reassembling all the components that were just removed.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Belt on the Piaggio Beverly 125
Replacing the Belt on the Piaggio Beverly 125
Beverly 125 In this brief and simple guide, you will learn how to dismantle and replace the drive belt on the Piaggio Beverly 125 scooter, following the instruct…
How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?
How to Replace the Headlight Bulb on the Piaggio Beverly Tourer 125?
Beverly 125 To replace the headlight bulb on the Piaggio Beverly Tourer 125, first unscrew the five bolts securing the visor, four at the front and one inside. N…
How to Change the Gearbox Oil in a Piaggio Beverly 125
How to Change the Gearbox Oil in a Piaggio Beverly 125
Beverly 125 To change the gearbox oil in a Piaggio Beverly 125, you need to loosen the drain plug located at the lower rear part of the transmission casing. Once…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos