Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Window Glass Seals

Model: (Various brands) Various

Today, discover how to remove and replace the glass seal on the windows of many low and mid-range car models in simple steps. First, open the door and lower the window completely on the affected side: then remove the seal by prying with something thin. Ensure that the clips underneath are intact so you can attach the new seal; then clean the surface with a degreasing solution and refit the new window seal, as shown in the video!

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

SiperClean and Gyeon: Two Products for Cleaning and Caring for Window Seals
SiperClean and Gyeon: Two Products for Cleaning and Caring for Window Seals
(Various brands) Various This video recommends two products for cleaning and caring for the window seals of your car. LCDA SuperClean is a powerful colloidal cleaner, ideal f…
Replacing Handlebar Grips on Aprilia Motorbike
Replacing Handlebar Grips on Aprilia Motorbike
(Various brands) Various Today, we will discuss a replacement that may seem trivial but is very important: replacing the handlebar grips on an Aprilia motorbike. This replace…
How Much Does It Cost to Replace the Internal Fuel Pump?
How Much Does It Cost to Replace the Internal Fuel Pump?
(Various brands) Various The cost of replacing the internal fuel pump can vary significantly depending on various factors such as the make, model of the vehicle, the location…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos