Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on Mitsubishi Space Star

Model: Mitsubishi Mitsubishi Various
Part: Service warning light

Get into the car and, unlike other car models, leave the ignition off. Press the button located under the speedometer responsible for the small screen multiple times: this will scroll through the various sections of the menu. Once you reach the service page, hold down the button. When the symbol starts to flash, release and press the button again. Turn on the ignition as a final check. Do not use this procedure unless you have actually performed the service, as this could lead to engine damage.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Mitsubishi Space Star?
How to Reset the Tyre Pressure Warning Light on a Mitsubishi Space Star?
Mitsubishi Mitsubishi Various Resetting the low tyre pressure warning light on the new Mitsubishi Space Star is very simple. Let's see how to do it in the attached video tutorial …
Resetting the Service of a 2012 Mitsubishi Space Star
Resetting the Service of a 2012 Mitsubishi Space Star
Mitsubishi Mitsubishi Various The video shows how to reset the service of a 2012 Mitsubishi Space Star. This is a very simple operation that can be done independently in a few min…
Resetting the Tyre Pressure Warning Light on the Mitsubishi Space Star
Resetting the Tyre Pressure Warning Light on the Mitsubishi Space Star
Mitsubishi Mitsubishi Various Today, you will learn how to reset the tyre pressure warning light on the Mitsubishi Space Star in simple and quick steps. First, get inside the vehi…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos