Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Aixam GTI Coupe

Model: (Various brands) Various
Part: Service warning light

In this video tutorial, we will see the main instructions on how to reset the service light for the routine maintenance oil change on an Aixam GTI coupe. First, get in the car: then turn on the ignition and hold down the button on the left found on the instrument panel. At this point, turn off the ignition and turn it back on while still holding the button, and wait a few seconds until the maintenance light disappears, as shown in the video. Check that the light has indeed been reset; if not, repeat the process!

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Aixam Coupe S Z402?
How do you reset the Service light on the Aixam Coupe S Z402?
(Various brands) Various In order to reset the Service light of the Aixam Coupe S Z402, you need to replace the engine oil and corresponding filter, following the steps shown…
How to Reset the Service Light on an Aixam?
How to Reset the Service Light on an Aixam?
(Various brands) Various To reset the Service light on an Aixam, press and hold the buttons located on the right and left of the instrument panel, just below the speedometer …
Resetting the Service Light on Aixam Microcars
Resetting the Service Light on Aixam Microcars
(Various brands) Various Hello everyone! Today, you will learn how to reset the service light on Aixam microcars. This light illuminates at predetermined intervals (set by th…

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos