Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on an Aixam?

Model: (Various brands) Various
Part: Service warning light

To reset the Service light on an Aixam, press and hold the buttons located on the right and left of the instrument panel, just below the speedometer and rev counter. While holding both buttons, turn the key to switch on the instrument panel without starting the engine. Keep holding the buttons until the light with the spanner icon on the left side of the display turns off automatically. Once the light has been reset, verify the operation by switching the instrument panel off and on again.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Aixam 50
Resetting the Service Light on the Aixam 50
(Various brands) Various In this brief guide, discover how to reset the service light for the routine maintenance oil change on the Aixam 50 cc. First, get in the vehicle and…
Resetting the Service Light on Aixam Microcars
Resetting the Service Light on Aixam Microcars
(Various brands) Various Hello everyone! Today, you will learn how to reset the service light on Aixam microcars. This light illuminates at predetermined intervals (set by th…
How to Reset the Service Light on the Aixam Crossline
(Various brands) Various This guide shows how to reset the service light on the Aixam Crossline microcar. The procedure does not require any special tools. With the instrumen…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the Service light on the KTM Duke 200 indicate? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos