Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Diesel Particulate Filter?

Model: (Various brands) Various
Part: Diesel particulate filter

To clean the diesel particulate filter, first remove it from the car: it is generally accessible from the underside of the vehicle and can be removed by loosening its mounting bolts. Once the filter is removed, clean it using a caustic soda solution for at least two hours, or a hydrochloric acid solution for a maximum of two hours. The filter must be sealed with cork stoppers to prevent the solution from leaking once poured inside. This procedure should be performed a second time, and then wash the filter with water to prevent corrosion.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Diesel Particulate Filter with Warm Up Additive
How to Clean the Diesel Particulate Filter with Warm Up Additive
(Various brands) Various .. In this video tutorial, you can see how to clean the diesel particulate filter with Warm Up additive: if your car has covered over 62,000.. …
How to Clean the Diesel Particulate Filter
How to Clean the Diesel Particulate Filter
(Various brands) Various If you want to clean the diesel particulate filter on your vehicle, you can follow the instructions provided in this video and the description below.…
How to Manually Regenerate the DPF on a Diesel Vehicle
How to Manually Regenerate the DPF on a Diesel Vehicle
(Various brands) Various On any diesel vehicle, regardless of mileage, there is a manual method to perform a "manual" regeneration of the diesel particulate filter (DPF). You…

    Frequently Asked Questions

    • Vari - Urea warning light on after when to refuel? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos