Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove the rear light of the 2017 Mini Countryman SE

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Tail light
Operation: How to remove the rear light of the 2017 Mini Countryman SE

The guide shows how to remove the rear light of the 2017 Mini Countryman SE. The first operation consists in opening the boot and removing the rubber sheath between the door gasket and the light to be removed; in this way the fixing screws of the same are highlighted. Using two or more plastic levers, press the chrome edge of the light to make it come off. At this point it is possible to unscrew the fixing screws of the light and, very carefully so as not to break the electric cable, slide it outwards. Now you can unplug the power cord. The assembly procedure is the same as disassembly but backwards.


Posted on 2 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Vari - Why aren't the rear lights of the Toyota Vitz working? Read Answer
    • Vari - Why does the rear light of the car not turn on? Read Answer
    • Vari - How much does it cost to replace the rear light on a car? Read Answer
    • Vari - How come the rear lights don't come on? Read Answer
    • Vari - How many reversing lights are there? Read Answer
    • Vari - What does code 16 mean on the Opel Adam? Read Answer
    • Vari - What is the meaning of code 16 in the Vauxhall Mokka? Read Answer
    • Vari - How to replace the headlights on the Opel 1700 Station Wagon? Read Answer
    • Vari - How do i change the bulb for the tail light? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos