Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat 124 Spider?

Model: Fiat Fiat Various
Part: Service warning light

To reset the Service light on the Fiat 124 Spider, turn on the instrument panel and navigate through the menu using the dial on the centre console. Select the "Applications" option and then the "Maintenance" option. The next option to select will be "Scheduled" and then "Reset". By selecting the last option, you will correctly reset the maintenance light. To verify the reset, turn off the car using the appropriate button and turn the instrument panel on again. The Service light will have been reset.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Fiat 124 Spider?
Where are the fuses located in the Fiat 124 Spider?
Fiat Fiat Various The fuses of the Fiat 124 Spider are located inside the dedicated fuse boxes in the car. The first box is found inside the cabin, on the lower part o…
Replace the Mechanical Fuel Pump of the Fiat Spider 1600
Replace the Mechanical Fuel Pump of the Fiat Spider 1600
Fiat Fiat Various In today's tutorial, you will learn how to remove and replace the mechanical fuel pump of the Fiat Spider 1600. First, open the bonnet and start by u…
How to Replace the Door Panel of the Fiat Spider?
How to Replace the Door Panel of the Fiat Spider?
Fiat Fiat Various To replace the door panel of the Fiat Spider, loosen the screws located on the armrest: the upper one is covered by a protective cap. After removing …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos