Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Computer of a Dodge Charger

Model: Dodge Dodge Various
Part: Warning light – error code

In this video, you will see how to reset the computer of a Dodge Charger. The system shown in the video is uConnect 8.4 (it is mounted on an SRT in the video, but it is the same operating system as in a Compass). As shown in the video starting from minute 3:00, you need to activate the ignition (without necessarily starting the car). Next, set the system to the home page (where all the functions appear). At that point, press the screen exactly in the top right corner and hold it for about 15 seconds. The system will then restart, and the system will be reset.

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Onboard Computer of the Dodge Journey?
How to Reset the Onboard Computer of the Dodge Journey?
Dodge Dodge Various To reset the onboard computer of the Dodge Journey, insert the key into the ignition and turn it back and forth between positions 1 and 2. This opera…
Resetting the Warning Light on Dodge Journey
Resetting the Warning Light on Dodge Journey
Dodge Dodge Various How do you reset the light that appears on the instrument cluster display? Let’s see how to reset the light that appears on the Dodge Journey display…
How to Reset the uConnect System on a Dodge Durango?
How to Reset the uConnect System on a Dodge Durango?
Dodge Dodge Various To reset the uConnect system on the Dodge Durango, turn on the ignition by rotating the key and simultaneously press the buttons to increase and decr…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos