Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the New Iveco Daily

Model: IVECO Daily MK 5 - Years 2014-2026
Part: Body

This guide shows how to open the bonnet of the new Iveco Daily. Like many cars, the opening of the engine compartment on the Iveco Daily is done in two stages: the first involves releasing the lock catch, while the second involves fully releasing the lock and securing the flap. The lock release lever is located in the cabin, on the driver's side; it is similar to levers found in cars and works the same way: pulling it releases the lock. After this operation, go to the front of the vehicle and look just below the edge of the flap: there will be a lever that allows you to fully release the flap. Once opened, secure the flap in place using the prop rod. Closing the engine compartment works like a normal car; simply push the panel into position to close it.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you open the hood of the Iveco Daily?
How do you open the hood of the Iveco Daily?
IVECO Daily (2014-2026 / MK 5) In order to open the hood of the Iveco Daily, you need to go inside the cabin, in order to locate the lever that allows you to unlock the hood latch:…
Location and Diagram of the Fuse Boxes in the Iveco Daily VI
Location and Diagram of the Fuse Boxes in the Iveco Daily VI
IVECO Daily (2014-2026 / MK 5) In this video, we see the location and diagram of the fuse boxes in the Iveco Daily VI: the main box is located inside the engine compartment, to the…
How to Replace the Cabin Air Filter on an Iveco Daily
How to Replace the Cabin Air Filter on an Iveco Daily
IVECO Daily (2006-2020 / MK 4) Before you start, open the front bonnet of your Iveco Daily. Begin by unclipping and removing the upper cover of the cabin air filter, which will giv…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos