Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. (Various brands)
  4. :
  5. Various
  6. : How to replace Mazda Millenia brake discs and pads

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Brake discs
Operation: How to replace Mazda Millenia brake discs and pads

To replace the Mazda Millenia brake pads and discs, we lift the car, remove the front wheel, unscrew the 2 bolts that hold the brake caliper and move it; we remove the pads, place one in front of the piston and with a clamp we tighten it so that the pad sends the piston inside; unscrew the 2 bolts that hold the pad bracket, removing it; we remove the 2 screws that hold the disc and screw one into the hole where the other two do not go so that by tightening the disc it comes out and when it moves we remove it; once the disc has been removed, reassemble the new disc and perform the reverse operation with respect to assembly. We perform the same operation for the other side.


Posted on 29 May 2024 by ScegliAuto



Replace the brake discs
(Various brands) Various Do we want to replace the brake discs of our car? Let's see how discs are disassembled and changed with tablets. We lift the car on a jack, unscrew t
Replacing the rear discs
(Various brands) Various Let's see how the rear disc brake with attached pads is removed. We unscrew the pins and remove the rims, then we begin to unscrew the pins of the br
Brake pads replacement
(Various brands) Various Replacing the disc brake pads if they are worn out? Let's see the disassembly of the front or rear pads. We lift the car on a column bridge (up to th

    Frequently Asked Questions

    • Vari - How much does it cost to replace brake discs and pads? Read Answer
    • Vari - How much do brake pads and discs cost? Read Answer
    • Vari - What is the tightening torque of the Sh 125 brake discs? Read Answer
    • Vari - How much does it cost to replace brake discs and pads? Read Answer
    • Vari - How often should the brake discs be replaced? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos