Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the rear brake discs

Model: (Various brands) Various
Part: Brake rotors

Video tutorial

This guide shows how to remove the rear brake disc along with the pads. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket.

Use a screwdriver to remove the brake pads. Now, take off the caliper bracket and unscrew the bolts on the brake disc, pulling the disc towards you to slide it off the hub. Apply grease to the bolts and prepare all parts for assembly.

Fit the brake disc with all the associated bolts, tighten the caliper bracket to the disc and the pads, then mount the brake caliper. Test the operation of the rear brakes.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How the Multi-Plate Clutch Works on Motorcycles
How the Multi-Plate Clutch Works on Motorcycles
(Various brands) Various In this video, see how the multi-plate clutch on motorcycles works, consisting of a series of "driven" plates mounted on a hub; the surface of the pl…
How to Replace the Clutch on Sherco Motorbikes?
How to Replace the Clutch on Sherco Motorbikes?
(Various brands) Various To replace the clutch on Sherco motorbikes, you will need to perform the same operation for almost all models: first, loosen the screws that secure t…
How to Replace Brake Discs
How to Replace Brake Discs
(Various brands) Various Do you want to replace the brake discs on your car? Here's how to remove and change the discs along with the pads. Lift the car on a jack, unscrew th…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos