Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Discs?

Model: (Various brands) Various
Part: Brake rotors

Video tutorial

This short video clearly shows how to replace the brake discs on a Fiat Doblò second series. The procedure is very similar for practically all classic cars (electric vehicles aside).

First, obtain a good jack with safety stands if you cannot put the car on a ramp as shown in the video. Once the car is lifted, perform the same procedure on each wheel where the disc needs to be replaced.

First, remove the wheel, then the caliper with the pads and the bracket holding the caliper. At this point, unscrew the bolt that secures the disc to the wheel assembly, and you can remove it. Follow the steps in reverse for reassembly.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Replace Brake Discs
How to Replace Brake Discs
(Various brands) Various Do you want to replace the brake discs on your car? Here's how to remove and change the discs along with the pads. Lift the car on a jack, unscrew th…
How the Multi-Plate Clutch Works on Motorcycles
How the Multi-Plate Clutch Works on Motorcycles
(Various brands) Various In this video, see how the multi-plate clutch on motorcycles works, consisting of a series of "driven" plates mounted on a hub; the surface of the pl…
Replacing the rear brake discs
Replacing the rear brake discs
(Various brands) Various This guide shows how to remove the rear brake disc along with the pads. Unscrew the bolts and remove the wheel, then start unscrewing the bolts of th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos