Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove Rivets from a Metal Panel

Model: (Various brands) Various

Video tutorial

If you need to remove rivets from a metal panel, follow the methods outlined below and check the video tutorial as well. The first method is to use a drill bit the same size as the rivet and drill through the panel directly at the rivet.

The second method is to use a grinder to wear down the head of the rivet until it reaches the surface of the panel. The third method is to use a chisel and hammer to strike the head of the rivet and pop it off.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

(Various brands) Various To remove the rivets from your car's number plate, you need to use a drill: this should be used to turn the rivets fixing the number plate counterclo…
(Various brands) Various If the bodywork of your vehicle has suffered a small impact that has removed the paint layer, this will expose the metal sheet to rust. If you do not…
(Various brands) Various In this video, you will see how to remove rivets, which are fastening systems used in various sectors and found in our cars, such as for securing bum…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos